 |
Description of the P 237
Monsoon Grand Piano |

Advantages of the construction and materials
used in the grand piano PETROF 237 Monsoon
Rim
- Petrof original.
- The inner rim - laminated, 13 solid beech
and birch lamels.
- CNC machined for high accuracy.
- Outer rim - laminated from birch plywood lamels.
- Inner face veneered horizontally by Ebony
Makassar.
- Total rim thickness is 78 mm.
Very stout rim ensures long term tuning stability and
action regulation stability. Strong rim and numerical
working supports the proper crown of sound board, which
conduces to precious color tone. Rare Ebony on the inner face
supports noble appearance of piano.
Frame Posts
- Four longitudinal spruce posts, one additional descant post made from compressed beech wood Lignamon,
one cross spruce posts.
- Joints of the posts and rim - fish tailed + beech dowels.
- Cross block of wooden frame is reinforced by profiled steel rail.
- Wooden frame is CNC worked.
A total of six frame posts and reinforcing of cross block by steel rail ensure its extraordinary form stability.
Last descant post made from Lignamon conduced to bright tone
of high frequencies. CNC working ensures perfect accuracy,
which conduces to exact tone of this instrument.
Legs
- Petrof original.
- Solid beech core, solid alder outer lining, Gabon counter veneer, decorative veneer.
- Prolonged legs are 625 mm.
Robust legs construction ensures high piano stability when played dynamically.
Iron Plate
- Czech producer.
- Gray cast iron, wet sand casted, hand finished, CNC
worked.
- New color.
CNC working ensures high accuracy of string scaling.
Bright color shade supports noble look of piano.
Iron Plate Support
- Adjustable steel bolt between iron plate and cross block of wooden frame.
Support of iron plate increases its form stability, resulting better tuning stability.
Hardware Fittings
- Petrof original.
- Solid polished brass, lacquered and stain resistant.
All the fittings are maintenance free.
Pin Block
- Special compressed beech plywood Multiples type, density 800 –850 kg/m3,
made with using moisture resistant glue.
Pin block is high resistant to climatic changes, providing stable torque of tuning pins and high tuning stability.
Soundboard
- Petrof original.
- Soundboard is made from European spruce wood.
- It's asymmetric crowned, diaphragmatic tapered from 9 mm under the bridge to 7 mm along its perimeter.
- It's new shaped in descant arc.
Asymmetric crown and diaphragmatic tapering of the soundboard gives piano great
output in the whole tonal range. Piano sounds enough even in
big concert halls.
Ribs
- Petrof original.
- Ribs are made from European spruce wood.
- They are individually asymmetrically shaped, tips are hand fitted.
Corner cross rib is laminated from beech lamels to arc
form, CNC worked.
Individually asymmetric shaped ribs support asymmetric crown of the soundboard. Proper soundboard crown
participates on nice piano sound. Arc cross rib makes better conditions for vibrations of the soundboard.
Bridges
- Petrof original.
- Treble bridge - solid beech body, maple top cap in the middle section,
top genuine ebony cap in top descant section.
- Bass bridge - solid beech body, top maple cap.
- Bridge is lightened by horizontals holes. Top caps
are graphite coated, hand notches, hand drilled for
pins.
Maple and Ebony caps of treble bridge support bright
tones of middle and treble frequencies. Lightened bass
bridge enables excellent good sounding of low tones.
Scale
- Agraffes, front and rear pretuned duplexes.
- Laser positioning of duplex bridges (frets).
- Single string hitching in the whole range.
Using of agraffs and duplexes shares in rich color of the piano.
Tuning Pins
- Nickel steel, stain resistant.
Strings
- Steel wire Mares USA or Röslau Germany.
- Copper Degen Germany.
- The longest bass string is 1710 mm.
Strings used in the P 237 Monsoon grand piano are made
from string wire of the world;s highest quality.
Hammer Heads
- Abel Germany, walnut or hornbeam mouldings, Abel Premium felt Hornbeam hammer shanks.
Abel hammers are one from the world best, made from very special hammer felt. These hammers enable to obtain wide scale of tone
colour.
Dampers
In this grand piano dampers are used which are produced by
the German company Renner. They are from solid wood and from
special felt of the highest quality. These dampers are considered to be one of the best
worldwide.
Action
- Renner Original, Germany.
- Wippen rail is made from vertically oriented plywood
Multiplex type.
- Hammer rail is made from solid beech wood.
- Action parts and hammer shanks are made from hard hornbeam
wood.
A Renner action is generally rated as one of the best. It
is reliable, equally quick and it is the frequently used
action in grand pianos of world class quality.
Keyboard
- Petrof original.
- Petrof keyboards are made from solid European spruce.
- White key tops area acrylic Polyplex from Sweden.
- Black keys are genuine Ebony wood.
- The entire keyboard is individually balanced.
Petrof keyboards belong among the top quality keyboards. Ebony wood provides
pleasant feeling while played, it supports certain play.
Key Bed
- Petrof construction, spruce wood sandwiched, beech veneered.
- Beech wood insert is set in the spruce core in legs and lyre
zone.
- Key bed thickness is 47 mm.
- The key bed is additionally reinforced by bulky solid wood rail
from below.
- Key bed is CNC worked.
Robust reinforced key bed ensures high stability of
piano, it provides feeling of reliance at play and conduce
to stable action regulation.
Pedals
- Three pedals, solid polished brass.
- Middle pedal has function of prolongement.
Construction, used materials and function of the pedals are fully comparable with
pedals mechanism of other high-end grand pianos.
Other technical
information about PETROF pianos.

|
|